HS-802
MODEL： II002
Feature
- Two setting modes available for thickness of material and initial diameter.
- The parameters can bed memorized even then if the power supply is turned off.
- The materiaI and initiaI diameter can be widely set.
- Multi-functional display including preset and actual tension values.
- Adoption of locking key to prevent miss-operation of input of invalid parameter.
- Build-in RS-485 interface, allows the communication with PLC and PC.
| Input voltage | AC 220 V + 10%; 50/6oHZ |
| 1 Set of Load Cell Input | Input range: 0 ~ 40 mV or -300~30omV floating type return and magnifying |
| 2 Set of Analog Input (Optional) | Input range : DC 0~10V, 12 bit resolution. Input mimpedance : 200K |
| 1 Set of Analog Output (1 Set for Optional) | Output range: DC 0~10V, max 10mA, 12 bit resolution |
| 4 Sets of Digital Input | Dry contact or crystal method mode (@Low Active) |
| 2 Set of Relay Digital Output | Relay A contact 5A 250VAC / 30VDC |
| RS-485 MODBUS Interface (Optional) | MODBUS RTU protocol, data control via communication mode |
| Operating Site | Indoor only |
| Operation Temperature | 00C~600C |
| Storage Temperature | 00C~600C |
| Humidity | Under 90% RH |
| Weight | Under 1.0kg |
Working Diagram
Wiring Of Terminal
* Aston Tech Ltd. reserve the right to change materials and specifications without prior notice.